Customer Cable Times Microwave LMR400 LMR600

Custom Cable Lengths
Using quality Time Microwave connectors on Times Microwave LMR cabling which is the best in the industry, we can make any length cabling for you. Either fill out the form below for instant purchases or give us a call.

LMR400
Low Loss 50 Ohm Cabling
Top of the line low loss cabling 50 Ohm made specifically for cellular and microwave applications. This is the cabling we use for all of our installations worldwide. All Cabling comes with N Male connectors and heat shrink wrapping sealing the cable to the connector. There is no cable on the market today with the properties of the Times Microwave LMR series! Just less than 1/2" thick and very light weight at .07 lbs/ft.

For each custom cable, we charge $25.00 for the labor, connectors, and testing. For each foot of cable the cost is .57 per foot. Enter on the cable length you need. If you require more than 1 custom cable please contact us.

LMR600
Even lower loss 50 Ohm Cabling

We use the LMR600 cabling when we need runs of 150-300 feet or where low signal areas make it necessary to lower any cable losses to maximize signal through the cable. This cabling has about 1/2 the losses as the LMR400 series. It is just under 5/8" thick. All Cabling comes with N Male connectors and have heat shrink wrapping sealing the cable to the connector.

For LMR600 custom cable, we charge $45.00 for the labor, connectors, and testing. For each foot of cable the cost is 1.25 per foot. Enter on the right the cable lengths you need. If you require more than 1 custom cable please contact us.

Labor and Connectors	Enter Length of Cable	Cost per foot
$45 +		x $1.25